D-Link DS-3550 Command Line Interface Reference Manual page 26

disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the switch's current configuration to non-volatile RAM:
DES-3550:4#enable web 80
Command: enable web 80
Success.
DES-3550:4#
Used to disable the HTTP-based management software on the
switch.
disable web
This command disables the Web-based management software on
the switch.
None.
Only administrator-level users can issue this command.
DES-3550:4#disable web
Command: disable web
Success.
DES-3550:4#
Used to save changes in the switch's configuration to non-volatile
RAM.
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded
into the switch's memory each time the switch is restarted.
None
Only administrator-level users can issue this command.
18