Table of Contents
Advertisement
DES-3550:4#create snmp community dlink view ReadView
read_write
Command: create snmp community dlink view ReadView
read_write
Success.
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
Used to remove a specific SNMP community string from the switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a
previously defined SNMP community string from the switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the switch's SNMP agent.
Only administrator-level users can issue this command.
DES-3550:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3550:4#
Used to display SNMP community strings configured on the switch.
show snmp community {<community_string 32>}
The show snmp community command is used to display SNMP
community strings that are configured on the switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the switch's SNMP agent.
None.
34
Advertisement
Table of Contents
