D-Link DS-3550 Command Line Interface Reference Manual page 55

config snmp system_location
Parameters
Restrictions
Example usage:
To configure the switch location for "
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the switch name for "
enable rmon
Purpose
Syntax
characters can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Only administrator-level users can issue this command.
H Q 5 F
DES-3550:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3550:4#
Used to configure the name for the switch.
config snmp system_name {<sw_name>}
The config snmp system_name command configures the name of
the switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
D E S - 3 5 5 0 S w i t c h ":
DES-3550:4#config snmp system_name DES-3550 Switch
Command: config snmp system_name DES-3550 Switch
Success.
DES-3550:4#
Used to enable RMON on the switch.
enable rmon
":
47