D-Link DS-3550 Command Line Interface Reference Manual page 89

show traffic control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display traffic control setting:
DES-3550:4#show traffic control
Command: show traffic control
Traffic Control
Destination
Module Group [ports] Threshold
Fail
------
1
1
1
1
1
1
1
1
Total Entries: 8
DES-3550:4#
Used to display current traffic control settings.
show traffic control {group_list <storm_grouplist>}
This command displays the current storm traffic control configuration
on the switch.
group_list <storm_grouplist> − Used to specify a broadcast storm
control group. This is specified by entering the syntax unit_id.
None.
------------- ---------
1 [1-8] 128
2 [9-16] 128
3 [17-24] 128
4 [25-32] 128
5 [33-40] 128
6 [41-48] 128
7 [49] 128
8 [50] 128
Broadcast Multicast
Storm Storm
--------- ---------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
81
Lookup
--------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled