D-Link DS-3550 Command Line Interface Reference Manual page 155

enable sntp
Parameters
Restrictions
Example usage:
To enable the SNTP function:
disable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example:
To stop SNTP support:
config time
Purpose
Syntax
Description
Parameters
will override any manually configured system time settings.
None.
Only administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
DES-3550:4#enable sntp
Command: enable sntp
Success.
DES-3550:4#
Disables SNTP server support.
disable sntp
This will disable SNTP support. SNTP service must be separately
configured (see config sntp).
None.
Only administrator-level users can issue this command.
DES-3550:4#disable sntp
Command: disable sntp
Success.
DES-3550:4#
Used to manually configure system time and date settings.
config time <date ddmmmyyyy> <time hh:mm:ss>
This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
date – Express the date using two numerical characters for the day
of the month, three alphabetical characters for the name of the
147