D-Link DS-3550 Command Line Interface Reference Manual page 182

DES-3550:4#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
----------------
Permit
default
Total Entries : 2
DES-3550:4#
config authen application
Purpose Used to configure various applications on the switch for
authentication using a previously configured method list.
Syntax
config authen application [console | telnet | http | all] [login |
enable] [default | method_list_name <string 15>]
Description This command is used to configure switch configuration
applications(console, telnet, web) for login at the user level and at
the administration level (authen_enable) utilizing a previously
configured method list.
Parameters Application – choose the application to configure. The user may
choose one of the following four applications to configure.
login – Use this parameter to configure an application for normal
login on the user level, using a previously configured method list.
enable - Use this parameter to configure an application for
upgrading a normal user level to administrator privileges, using a
previously configured method list.
default – Use this parameter to configure an application for user
-------- ---------------
1 tacacs+
2 tacacs
3 Darren
4 local
1 tacacs+
2 local
console – choose this parameter to configure the command
line interface login method.
telnet – choose this parameter to configure the telnet login
method.
http – choose this parameter to configure the web interface
login method.
all – choose this parameter to configure all applications
(console, telnet, web) login method.
174
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Keyword