D-Link DS-3550 Command Line Interface Reference Manual page 132

show 802.1x auth_state
Restrictions
Example usage:
To display the 802.1x auth state:
DES-3550:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port
------
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CTRL+C ESC q
config 802.1x capability ports
Purpose
Syntax
Description
Parameters
Only administrator-level users can issue this command.
Auth PAE State Backend State
----------------------- ---------------------
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
Quit SPACE n Next Page
Used to configure the 802.1x capability of a range of ports on the
switch.
config 802.1x capability ports [<portlist> | all] [authenticator |
none]
The config 802.1x command has four capabilities that can be set for
each port. Authenticator, Supplicant, Authenticator and Supplicant,
and None.
<portlist> − Specifies a port or range of ports to be configured.
124
Port Status
-----------------
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Authorized
Enter Next Entry a All