D-Link DS-3550 Command Line Interface Reference Manual page 163

System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
Total Entries = 20
DES-3550:4#
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To remove dynamic entries in the ARP table:
10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
10.1.1.169 00-50-BA-70-E4-4E
10.1.1.254 00-01-30-FA-5F-00
10.9.68.1 00-A0-C9-A4-22-5B
10.9.68.4 00-80-C8-2E-C7-45
10.10.27.51 00-80-C8-48-DF-AB
10.11.22.145 00-80-C8-93-05-6B
10.11.94.10 00-10-83-F9-37-6E
10.14.82.24 00-50-BA-90-37-10
10.15.1.60 00-80-C8-17-42-55
10.17.42.153 00-80-C8-4D-4E-0A
10.19.72.100 00-50-BA-38-7D-5E
10.21.32.203 00-80-C8-40-C1-06
10.40.44.60 00-50-BA-6B-2A-1E
10.42.73.221 00-01-02-03-04-00
10.44.67.1 00-50-BA-DA-02-51
10.47.65.25 00-50-BA-DA-03-2B
10.50.8.7 00-E0-18-45-C7-28
10.90.90.90 00-01-02-03-04-00
10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from
the switch's ARP table. Static ARP table entries are not affected.
none.
Only administrator-level users can issue this command.
DES-3550:4#clear arptable
Command: clear arptable
Success.
DES-3550:4#
155
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Local