D-Link DS-3550 Command Line Interface Reference Manual page 28

To restore all of the switch's parameters to their default values:
login
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To initiate the login procedure:
logout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To terminate the current user's console session:
DES-3550:4#logout
DES-3550:4#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
DES-3550:4#
Used to log in a user to the switch's console.
login
This command is used to initiate the login procedure. The user will
be prompted for his Username and Password.
None.
None.
DES-3550:4#login
Command: login
UserName:
Used to log out a user from the switch's console.
logout
This command terminates the current user's session on the
switch's console.
None.
None.
20