Ethernet port of the peer device. The 10/100/1000Base-T copper ports of the router support
MDI/MDI-X auto-sensing. They are connected to the network through category-5 or above
twisted pairs that are equipped with RJ-45 connectors.
2.
Examine the status LED of the Ethernet ports. For more information about the LED status, see
"Appendix B
Connecting a fiber cable
Transceiver module overview
When you use a fiber port, you need an SFP, XFP, SFP+, or QSFP+ transceiver module and a fiber
cable with an LC connector. For the compatibility between the cards and transceiver modules, see
HPE FlexNetwork 6600/HSR6600/HSR6800 Router Series Interface Module Guide.
Figure 33 SFP transceiver module
Figure 34 XFP transceiver module
Figure 35 SFP+ transceiver module
LEDs."
30