Magic Vac Maxima 2 Operating Manual page 41

not dirty.
place it under water and squeeze. If you see bubbles, there is a leak. Reseal or
use another bag.
When you can't completely seal the bag, press the "sealing mode" button (2M)
and increase the sealing time.
®
MAGIC VAC does not
Sealing Bar (6) to cool for a few minutes.
correctly seal the bag
be refrigerated.
the bag, clean the upper part of the inside of the bag and remove any residue from
The MAGIC VAC ® bag
the Sealing Bar (6) before resealing.
doesn't maintain its
vacuum after sealing
any pointed edges of the contents in the bag using paper napkins.
necessary) and the ACCESSORY PORT (4) on the machine.
or canister.
®
MAGIC VAC does not
seal containers.
the sealing zone. Clean the rim and the lid with a damp cloth and reseal.
position and not damaged.
and that it is set to "CLOSED" after it is complete.
positioned.
®
MAGIC VAC Executive
canisters or Universal
the sealing zone. Clean the rim and the lid with a damp cloth and reseal.
MAGIC VAC ® Lids do
not maintain the seal
position and not damaged.
well as the ACCESSORY PORT (4) on the machine.
ACO1073) is set to "OPEN - (M)" and that the Handles (1) are attached.
positioned.
the sealing zone. Clean the rim and the lid with a damp cloth and reseal.
The marinating cycle
does not start correctly
well as the ACCESSORY PORT (4) on the machine.
position and not damaged.
lights on the Progress Display (2C) are regularly lit.
MAGIC VAC ® bag may be punctured. To check, seal the bag with air inside,
Sealing Bar (6) overheats and melts the bag, lift the Cover (5) and allow the
Canister Tube (16), connect the canister lid (or the Lid Attachment if
O-Ring under the knob on the canister lid or universal lid is correctly
O-Ring under the knob on the canister lid or universal lid is correctly
40
Airtight Gasket (7) and Sealing Gasket (9) are
Sealing Gasket (9)
"VACUUM" before vacuum-packing
MAGIC VAC ® Executive Canister (cod.