Manual Cycle For Vacuum Packing In Bags - Magic Vac Maxima 2 Operating Manual

e) Wait for the LED seal light (2B) in the centre of the Progress Display (2C) to stop flashing.
f) Unlock the Cover (5) by rotating one of the two Handles (1) (fig. O) and remove the bag.
g) Check the seal obtained which should look like a regular horizontal line, smooth and without
wrinkles (fig. O1).
fig. O

7 - Manual cycle for vacuum packing in bags

Cycle A) To limit air extraction so as not to crush delicate and fragile foods, proceed as follows:
a) Insert the food in the MAGIC VAC
from the inside of the end of the bag that must be sealed.
b) Lay the bag with its contents in front of the machine, placing the open end inside the Vacuum
Chamber (8) (fig. L and L1).
c) Close the machine by rotating the Handles (1) to the START position (fig. M) and, looking
through the Lit WINDOW (3), make sure the open end of the bag is inside the vacuum chamber
(8) (fig. M1).
d) Select the "slow" speed using the "pump speed" button (2N) as in the previous point 3.2.
e) Press the "vacuum" button (2G) to start the manual vacuum cycle (fig. P).
f) Activate sealing before the fragile and delicate foods in the bag is crushed by pressing the
"seal" button (2H) (fig. P1).
g) Wait for the LED seal light (2B) in the centre of the Progress Display (2C) to stop flashing.
fig. L
h) Unlock the Cover (5) by rotating one of the two Handles (1) (fig. O) and remove the bag.
i) Check the seal obtained which should look like a regular horizontal line, smooth and without
wrinkles (fig. O1).
fig. O
®
Bag (see point 4), and eliminate any liquids or food residues
fig. M1
fig. M
fig. L1
fig. O1
32
fig. O1
fig. P
fig. N
fig. P1