Set The Pump Suction Speed; Cancel Button; Recommendations For Bag Use; Making Bags From Magic Vac - Magic Vac Maxima 2 Operating Manual

3.2 - Set the Pump suction Speed

The MAXIMA 2 is equipped with a pump suction speed regulator to make the packing operation
easier. When the machine is activated by rotating the Handles (1) to the START position, the
speed is automatically set to "turbo" or the highest that can be used in normal packing operations.
However, when packing fragile foods in MAGIC VAC
which reduces the pump speed, thus allowing control over the performance of the operation by
manual activating the sealing process with the "seal" button (2h) at the proper time.
If the "slow" speed is selected and the "canister" or "marinating" functions are then activated,
the speed will automatically set itself to "turbo".
3.3 - Cancel Button - (2I)
To stop the machine at any time, press the "cancel"
button (2I) as shown in figure B. All the LEDs will flash
for several seconds. When they go off, the machine
can be reactivated for any function.

4 - Recommendations for bag use

MAGIC VAC ® bags are available in various sizes. Check the ideal bag size for the food that you
intend to store. Make sure the length of the bag to be used is at least 8 cm greater than the food
to be stored and add another 2 cm for each time the bag is to be reused.

5 - Making bags from MAGIC VAC

a) Open the machine by rotating the Handles (1) to the
OPEN position (fig. C and D).
b) Unroll the correct length from the roll (fig. E).
c) Close the Cover of the Roll Compartment (12) and
cut the piece using the Bag Cutter (13), as shown in
(fig. F), by running it from one side to the other.
fig. D
®
bags, it is best to select the "slow" function
fig. B
®
rolls
fig. C
fig. E
30
fig. F