VEHICLE SETTINGS CUSTOMISATION MENU
1
On equipped vehicles, this function,
which is integrated in the trip compu-
ter 1, allows you to activate/deactivate
some of the vehicle's functions.
Accessing the settings
customisation menu
With the vehicle stopped, press
button 2 or 3 several times until the
message "Settings menu: press and
hold" is shown on display 1. Press
either button 2 or 3 for longer than 2
seconds to enter the menu.
1.68
Adjusting the settings
Press button 2 or 3 to select a function
to change:
a) Auto door locking while driving ;
b) Auto dipped-beam headlights ;
c) Rear parking sensor ;
d) Parking sensor volume ;
e) LANGUAGE.
=
function activated
<
function deactivated
Once a line has been selected, keep
pressing button 2 or 3 to change the
function: If you select either "Parking
sensor volume" or "LANGUAGE", you
2
will have to make a further selection
(sound volume of the parking distance
control or instrument panel language).
In this case, make your selection and
confirm it by holding either button 2
or 3, the value selected is shown by a
~
in front of the line.
3
To exit the menu, select "EXIT" or
"BACK" then confirm by keeping either
button 2 or 3 pressed. It may be nec-
essary to carry out this operation more
than once.
The vehicle settings personalisation
menu cannot be used when driving.
The display automatically switches
back to trip computer mode.