Office Time; Figure 51: Create New Office Time - Grandstream Networks UCM6100 Series User Manual

----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
Manually setup time will take effect immediately after saving and applying change in the Web GUI. If users
would like to reboot the UCM6100 and keep the manually setup time setting, please make sure "Remote
NTP Server", "Enable DHCP Option 2" and "Enable DHCP Option 42" options under Web GUISystem
SettingsTime SettingsAuto Time Updating page are unchecked or set to empty. Otherwise, time
auto updating settings in this page will take effect after reboot.
----------------------------------------------------------------------------------------------------------------------------- ---------------

Office Time

On the UCM6100, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to
Web GUISystem SettingsTime SettingsOffice Time. Press "Create New Office Time" to create an
office time.

Figure 51: Create New Office Time

P a g e 89
|
UCM6100 Series User Manual