Front Grill Kit - Can-Am Maverick Operator's Manual

4. Remove any excess of oil by wrap-
ping the engine air post-filter into an
absorbent cloth and squeezing gen-
tly. This will also ensure a full oil cov-
erage on engine air post-filter.
5. Reinstall the engine air post-filter on
its support.
Engine Air Filter Installation
1. If engine air post-filter required, po-
sition rack in second section (clean
chamber) of engine air filter hous-
ing.
tmo2013-003-054_a
1. Second section (clean chamber)
2. Rack
2. Install oiled engine air post-filter.
tmo2013-003-053_b
1. Engine air post-filter
3. Install engine air filter.
4. Verify that engine air filter rubber
seal has no gap with the engine air
filter housing.
NOTICE
may bypass the engine air filter.
tmo2013-003-052_a
1. Engine air filter
5. Verify that the cover fits well on the
engine air filter housing before clos-
ing clamps.
tbs2011-009-003

Front Grill Kit

1. Remove front left inner fender.
2. Remove debris from front grill kit.
_______________
MAINTENANCE PROCEDURES
If the fit is not good, dust
79