Tool Kit; Rewind Starter Handle; Dipstick - Can-Am outlander 400 series Operator's Manual

24) Tool Kit

The tool kit is located in the rear stor-
age compartment. It contains tools
for basic maintenance, this Opera-
tor's Guide and the BASIC GUIDE TO
WINCHING TECHNIQUES with the
XT models.
The tools included in the tool kit are:
– pliers (1)
– screwdriver (1)
– open wrench 10/13 mm (1)
– open wrench 15/17 mm (1)
– socket wrench 10/13 mm (1)
– socket wrench 16/18 mm (1)
– tire pressure gauge (1)
– shock absorber key (1)
– fuse 30 A (1)
– fuse 20 A (1)
– fuse 15 A (1).

25) Rewind Starter Handle

The rewind starter handle is provided
as an emergency starting device.
Follow the usual starting procedure;
but use the rewind starter instead of
the electric starter.
Located on right side of vehicle. Auto-
rewind type. To engage mechanism,
pull handle slowly until a resistance is
felt then continue to slowly pull the
handle until the compression stroke
peak (strong rotating resistance) is
overpassed then,
Slowly release handle.
pull vigorously.
_____________________
vmo2006-005-034_b
1. Rewind starter handle

2. Dipstick

26) Dipstick
Located on the right side of engine.
Allow to check the oil level in the en-
gine.
vmo2006-005-034_b
1. Rewind starter handle
2. Dipstick
Refer to LIQUIDS to check the engine
oil level correctly.
91