Engine Coolant - Can-Am Maverick Operator's Manual

tmo2013-003-058_a
1. Lower bolt
2. Upper bolts
3. Bumper
Remove eight bolts from plastic radi-
ator cover and remove radiator plastic
cover.
tmo2013-003-058_b
1. Plastic radiator cover
2. Bolts
Periodically check the radiator area for
cleanliness.
tmo2013-003-020_a
1. Radiator
Inspect radiator and hoses for leaks or
any damage.
Inspect radiating fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.
If available, use a garden hose to rinse
the radiating fins.
CAUTION Never clean radiator
with your hands when it is hot. Let
the radiator cool down before clean-
ing.
NOTICE
the radiating fins when cleaning. Do
not use any object/tool that could
damage the fins. When hosing, use
low pressure only. Never use a HIGH
PRESSURE washer.
Reinstall plastic radiator cover, bumper
and service cover in reverse of removal
procedure above.

Engine Coolant

Engine Coolant Level Verification
Check coolant level with engine
cold.
1. Place vehicle on a level surface.
2. Unlatch service cover as follows.
NOTICE
scribed procedure for opening the
service cover may lead to cover
damage.
_______________
MAINTENANCE PROCEDURES
Be careful not to damage
WARNING
Failure to follow the de-
85