Transporting The Vehicle - Can-Am Maverick Operator's Manual

Table of Contents

Advertisement

TRANSPORTING THE VEHICLE

If your vehicle needs to be transported,
it should be carried inside a full size
pick-up box or on a flatbed trailer of the
proper size and capacity.
NOTICE
Do not tow this vehicle —
towing can seriously damage the ve-
hicle's drive system.
When contacting a towing or trans-
porting service, be sure to ask if they
have a flatbed trailer, loading ramp or
power ramp to safely lift the vehicle
and tie-down straps. Ensure the vehi-
cle is properly transported as specified
in this section.
NOTICE
Avoid using chains to tie
the vehicle — they may damage
the surface finish or plastic com-
ponents.
WARNING
If the vehicle is equipped with a
windshield, transport it facing for-
ward to avoid damaging the wind-
shield.
To load the vehicle on a platform for
transport, proceed as follow:
1. Shift the vehicle into NEUTRAL (N).
2. Then proceed as follows:
2.1 Put a strap around the lower
arm of each front suspension.
2.2 Attach the straps to the winch
cable of the towing vehicle.
2.3 Pull the vehicle on the flatbed
trailer with the winch.
3. Remove the key from the ignition
switch.
4. Strap the front tires by using tire
towing straps.
5. Pass a tie-down strap inside each
rear wheel.
6. Firmly attach the rear wheels
tie-down straps to both sides of the
rear of the trailer with ratchets.
7. Ensure that both the front and rear
wheels are firmly attached to the
trailer.
Make sure no loose objects are
present inside vehicle during vehi-
cle transportation.
_______________
WARNING
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents