Maintenance Procedures; Tool Kit; Body Panels - Can-Am spyder gs 2008 Operator's Manual

MAINTENANCE PROCEDURES

Tool Kit

The tool kit is located inside the front
storage compartment, on the left-hand
side of the vehicle.
rmo2008-001-031_a
1. Tool kit located in the front storage
compartment
It contains the tools for the basic main-
tenance in this Operator's Guide.
rmo2008-001-030_a
TOOL KIT
The tools included in the tool kit are:
1. wrench 10/13 mm
2. wrench 7.5 mm
3. electronic tire pressure gauge
4. *speed sensor gauge
5. Allen key 6 mm
6. Allen key 5 mm
7. screwdriver handle
8. screwdriver shaft - Flat and Phillips
head
9. screwdriver shaft - Torx head 10/30
10. socket wrench 10/13 mm
11. *spark plug wrench 16 mm
______________________
76
12. front suspension adjusting wrench
(not illustrated) (p. 23)
13. towel (not illustrated).
The tools marked with (*) are used only
for procedures in the maintenance
manual.

Body Panels

The body panels on the left side of the
vehicle can be removed for mainte-
nance.
rmo2008-001-029_a
LEFT HAND SIDE PANELS
1. Middle side panel
2. Top side panel
3. Rear side panel
4. Bottom side panel
1) Middle Side Panel
rmo2008-001-024_a
1. Middle side panel
Removal
1. Unscrew 3 clips.