Can-Am Maverick Operator's Manual page 16

PRE-RIDE INSPECTION
ITEMS TO BE
INSPECTED
Brake pedal
Fuel level
Horn
Mirrors
Shift lever
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
Steering
Ignition switch
Shift lever
2WD/4WD selector
Brakes
_______
14
INSPECTION TO PERFORM
Press down on the brake pedal and make sure you feel
firm resistance and that it fully returns to position when
released.
Check the fuel level.
Check horn operation.
Adjust mirrors to your preferences.
Unlock shift lever with shift lever locking key.
INSPECTION TO PERFORM
Check if steering operates freely by completely turning it
from side to side.
Turn the ignition switch to OFF to verify if engine will shut
down. Restart engine.
Check operation of shift lever (P, R, N, H and L).
Check operation of 2WD/4WD selector.
Drive forward slowly a few feet and apply brakes. The
brake pedal must feel firm when applied. The pedal must
return to rest position when released. The brakes must
respond adequately to the driver's input.
SAFETY INFORMATION
________
✔
✔