Setting The Ringer Level - Icom IC-F3210D Instruction Manual

3
BASIC OPERATION

Setting the Ringer level

■
The Ringer level can be adjusted between 1 and 5, or 1 (Linked)
and 5 (Linked). When a Linked option is selected, the Ringer level
is adjusted with [VOL].
Rotate [VOL] to turn the trans-
q
ceiver power OFF.
Set [ROTARY SELECTOR] to
w
Channel 16.
While holding down [Lower], ro-
e
tate [VOL] to turn ON the power
and enter the Ringer level ad-
justment mode.
Push [Upper] to increase, or
r
push [Lower] to decrease the
Ringer level.
• The adjustable range is 1 to 5 or
1 (Linked) to 5 (Linked).
• If the level is set on 5 or 5
(Linked), pushing [Upper] se-
lects 1 (Linked) or 1, respective-
ly. If the level is 1 or 1 (Linked),
pushing [Lower] selects 5 (Linked) or 5, respectively.
• A beep sounds after pushing [Upper] or [Lower]. Therefore, you
can determine the current level setting by the type of beep that
sounds.
Rotate [VOL] to turn the power OFF, then ON again to exit the
t
beep level adjustment mode.
NOTE: This operation may not be available, depending on the
presetting. Ask your dealer for details.
19
[ROTARY SELECTOR]
[Upper]
[Lower]
[VOL]