Safety Training Information - Icom IC-F3210D Instruction Manual

7
W ARN ING
This radio has been tested and complies with the FCC RF exposure
limits for "Occupational Use Only". In addition, your Icom radio complies
with the following Standards and Guidelines with regard to RF energy
and electromagnetic energy levels and evaluation of such levels for ex-
posure to humans:
C AU TIO N
39

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electromagnetic energy
during transmit mode. This radio is designed for and
classified as "Occupational Use Only", meaning it must
be used only during the course of employment by indi-
viduals aware of the hazards, and the ways to minimize
such hazards. This radio is NOT intended for use by the
"General Population" in an uncontrolled environment.
• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluat-
ing Compliance with FCC Guidelines for Human Exposure
to Radio Frequency Electromagnetic Fields.
• American National Standards Institute (C95.1-1992), IEEE
Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300
GHz.
• American National Standards Institute (C95.3-1992), IEEE
Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields– RF and Microwave.
• The accessories (antennas, batteries, belt clips, speaker-
microphone, etc. that is listed on pages 33–35) are autho-
rized for use with this product. Use of accessories other than
those specified may result in RF exposure levels exceeding
the FCC requirements for wireless RF exposure.
To ensure that your expose to RF electromagnetic
energy is within the FCC allowable limits for occu-
pational use, always adhere to the following guide-
lines: