Icom IC-F3210D Instruction Manual page 15

• Call LED (ON): Turns ON while receiving a status call, a SDM
• Call LED (Blink): Blinks while receiving a status call, a SDM (Short
O
• Success: Blinks slowly when your call is successful.
• Failure: Blinks slowly when your call fails, or it is refused.
• TX inhibit: While in the TX inhibit mode and the TOT or Lockout
function is activated.
• Power ON: Blinks at transceiver startup.
• Emergency/Siren: Blinks when an Emergency call is received or a
(Short Data Message) or a Call Alert call, depend-
ing on the preprogramming.
O
Data Message) or a Call Alert call, depending on
the preprogramming.
O
O
O
R O
R O G R O G
Siren is activated.
G O R G O R
PANEL DESCRIPTION
G
R
O O
G O R
2
G O R
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
8