Output Power Level Selection; Priority A Channel Selection; Basic Operation - Icom IC-F3210D Instruction Manual

Output power level selection

■
If the transceiver has [High/Low] assigned to it, the transmit output
power level can be selected.
When the battery case is selected as the battery type, or the bat-
tery voltage drops to a low power level and the LED indicator sta-
tus is "Low Battery 2," the output power automatically switches to
"Low 1." (pp. 7, 12)
Push [High/Low] to select the transmit output power level.
➥
• One beep sounds when "Low 1" is selected.
• Two beeps sound when "Low 2" is selected.
• Three beeps sound when "High" is selected.

Priority A channel selection

■
When either operation is performed, the transceiver automatically
selects the Priority A channel.
• Turning the power ON
The Priority A channel is selected each time the transceiver power
is turned ON.
• Auto reset
The Priority A channel is selected when the Auto Reset timer
ends.

BASIC OPERATION

3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
20