As set in Pr. 338 Communication operation command source and Pr. 339 Communication speed command source. (Refer to page 167)
*2
At occurrence of RS-485 communication error, the inverter cannot be reset from the computer.
*3
Enabled only when stopped by the PU. At a PU stop, PS is displayed on the operation panel. As set in Pr. 75
*4
Some parameters may be write-disabled according to the Pr. 77
*5
Some parameters are write-enabled independently of the operation mode and command source presence/absence. When Pr. 77 = 2, write is
enabled. (Refer to page 59 for the parameter list)Parameter clear is disabled.
*6
When Pr. 550 NET mode operation command source selection = 1 (RS-485 terminals valid) or Pr. 550 NET mode operation command source selection = 9999 and the
communication option is not fitted.
*7
When Pr. 550 NET mode operation command source selection = 0 (communication option valid) or Pr. 550 NET mode operation command source selection