Mitsubishi Electric F700 Instruction Manual page 275

•400V class
Type FR-F740- K
Applicable motor capacity (kW)
Rated capacity (kVA)
*2
Rated current (A)
*3
Overload current rating
*4
Voltage
*5
Rated input AC voltage/frequency
Permissible AC voltage fluctuation
Permissible frequency
fluctuation
Power supply
Without DC reactor
system capacity
With DC reactor
(kVA)
*6
Protective structure
(JEM 1030)
*8
Cooling system
Approx. mass (kg)
Type FR-F740- K
Applicable motor capacity (kW)
Rated capacity (kVA)
*2
Rated current (A)
*3
Overload current rating
*4
Voltage
*5
Rated input AC voltage/frequency
Permissible AC voltage fluctuation
Permissible frequency fluctuation
Power supply
Without DC reactor
system
LD
With DC
capacity
reactor
SLD
(kVA)
*6
Protective structure
(JEM 1030)
*8
Cooling system
Approx. mass (kg)
*1 The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi 4-pole standard motor.
*2 The rated output capacity indicated assumes that the output voltage is 440V.
*3 When operating the inverter with the carrier frequency set to 3kHz or more, the carrier frequency automatically decreases if the inverter output
current exceeds the value in parenthesis of the rated current. This may cause the motor noise to increase.
*4 The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty,
allow time for the inverter and motor to return to or below the temperatures under 100% load.
*5 The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range.
However, the pulse voltage value of the inverter output side voltage remains unchanged at about
*6 The power supply capacity varies with the value of the power supply side inverter impedance (including those of the input reactor and cables).
*7 When the hook of the inverter front cover is cut off for installation of the plug-in option, the inverter changes to an open type (IP00).
*8 FR-DU07: IP40 (except for the PU connector)
0.75 1.5 2.2 3.7
0.75 1.5 2.2 3.7
*1
1.6 2.7 3.7 5.8
2.1 3.5 4.8 7.6
(1.8) (3.0) (4.1) (6.4)
120% 60s, 150% 3s (inverse time characteristics)
2.1 4.0 4.8 8.0
1.2 2.6 3.3 5.0
Self-cooling
3.5 3.5 3.5 3.5
75 90 110 132 160 185 220 250 280 315 355 400 450 500 560
75 90 110 132
*1
110 137 165 198
144 180 216 260
(122) (153) (183) (221)
- - - -
110 137 165 198
137 165 198 247
37 50 57 72
5.5 7.5 11 15 18.5
5.5 7.5 11 15 18.5
8.8 12.2 17.5 22.1 26.7
11.5 16 23 29
(9.8) (13) (19) (24)
Three-phase 380 to 480V
Three-phase 380 to 480V 50Hz/60Hz
323 to 528V 50Hz/60Hz
±5%
11.5 16 20 27
8.1 10 16 19
Enclosed type (IP20)
*7
Forced air cooling
3.5 6.5 6.5 7.5
160 185 220 250 280
247 275 329 366 416
325 361 432 481 547
(276) (306) (367) (408) (464)
120% 60s, 150% 3s
(inverse time characteristics)
Three-phase 380 to 480V
Three-phase 380 to 480V 50Hz/60Hz
323 to 528V 50Hz/60Hz
±5%
- - - - -
247 275 329 366 416
275 329 366 416 464
Open type (IP00)
Forced air cooling
72 110 110 175 175
Rating
22 30 37 45
22 30 37 45
32.8 43.4 53.3 64.8 80.8
35 43 57 70 85
(30) (36) (48) (60) (72)
32 41 52 65 79
24 31 41 50 61
Open type (IP00)
7.5 13 13 23 35
315 355 400 450 500
464 520 586 659 733
610 683 770 866 962
(518) (580) (654) (736) (817)
- - - - -
464 520 586 659 733
520 586 659 733 833
175 260 260 370 370
that of the power supply.
2
55
55
106
(90)
99
74
35
560
833
1094
(929)
-
833
923
370
7
267