Prestigio CAVALIERE 141 Technical & Service Manual page 57

Prestigio Cavaliere 141
2.2.6 SO-DIMM
Disassembly
1. Carefully put the notebook upside down. And remove the battery pack. (See section 2.2.1 disassembly)
2. Remove one screw fastening the memory compartment cover to access the SO-DIMM socket. (Figure 2-13)
Figure 2-13 Remove the cover
3. Pull the retaining clips outwards ( ) and remove the SO-DIMM ( ). (Figure 2-14)
Reassembly
1. To install the SO-DIMM, match the SO-DIMM's notched part with the socket's projected part and firmly insert the
SO-DIMM into the socket at 20-degree angle. Then push down until the retaining clips lock the SO-DIMM into
position.
2. Replace one screws to fasten the memory compartment cover.
3. Replace the battery pack. (See section 2.2.1 reassembly)
Figure 2-14 Remove the SO-DIMM
56
Technical Service Manual