Table of Contents
Advertisement
Prestigio Cavaliere 141
Technical Service Manual
4. Remove four screws to separate the hard disk drive from the bracket. (Figure 2-10)
Figure 2-10 Free the HDD drive
Reassembly
1. To install the hard disk drive, place it in the bracket and secure with four screws.
2. Put the hard disk drive in the compartment and slide it inwards to plug.
3. Replace the HDD compartment cover and secure with two screws.
4. Replace the battery pack. (See section 2.2.1 reassembly)
54
Advertisement
Table of Contents
