Table of Contents
Advertisement
Prestigio Cavaliere 141
Technical Service Manual
4. Push the lever to the right .Then lift up the lever to the vertical position .Finally remove the existing CPU.(Figure 2-7)
2
1
Figure 2-7 Remove the P4 CPU
Reassembly
1. Align the arrowhead corner of the CPU with the beveled corner of the socket, and insert the CPU pins into the holes.
Place the lever back to the horizontal position and push the lever to the left.
2. Reconnect the fan's power cord to the system board, fit the heat sink onto the top of the CPU and secure with four
screws.
3. Replace the CPU compartment cover and secure with two screws.
4. Replace the battery pack. (See section 2.2.1 reassembly)
52
Advertisement
Table of Contents
