Prestigio CAVALIERE 141 Technical & Service Manual page 26

Prestigio Cavaliere 141
1.2.9 LAN PHY_ICS1893
The ICS1893 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX
Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards. The ICS1893 architecture is
based on the ICS1892. The ICS1893 supports managed or unmanaged node, repeater, and switch applications. The
ICS1893 incorporates digital signal processing (DSP) in its Physical Medium Dependent (PMD) sublayer. As a
result, it can transmit and receive data on unshielded twisted-pair (UTP) category 5 cables with attenuation in
excess of 24 dB at 100 MHz. With this ICS-patented technology, the ICS1893 can virtually eliminate errors from
killer packets. The ICS1893 provides a Serial Management Interface for exchanging command and status
information with a Station Management (STA) entity. The ICS1893 Media Dependent Interface (MDI) can be
configured to provide either half- or full-duplex operation at data rates of 10 MHz or 100 MHz. The MDI
configuration can be established manually (with input pins or control register settings) or automatically (using the
Auto-Negotiation features). When the ICS1893 Auto-Negotiation sublayer is enabled, it exchanges technology
capability data with its remote link partner and automatically selects the highest-performance operating mode they
have in common.
1.2.10 PCMCIA controller_ ENE CB1410 + ENE CP2211
CB1410
Ability to wake from D3
3.3V core logic with universal PCI interface compatible with 3.3V and 5V PCI signaling environment
Mix-to-match 5V/3.3V 16 bit PC Cards and 3.3V CardBus Cards
Single PC Card or CardBus slot with hot insertion and removal
Burst transfers to maximize data throughput on the PCI bus and the CardBus bus
and D3
HOT COLD
25
Technical Service Manual