Table of Contents
Advertisement
3-6 CP Setup Mode
3-6-3 Key Assignments in CP Setup Mode
3-6-4 Carrying Out Control Panel Setup
3-40 (E)
Chapter 3 Operating Modes
In the CP Setup mode, the function keys to the left of and below the liquid
crystal display (B1 to B7, and L1 to L11) are assigned to the following
functions.
Key
Function name
(caption)
L1
General Setup
L2
Material Setup
L3
Edit Setup
L4
Timer Rec/Play
Setup
L5
Dual Play Setup
L6
Port Setup
L7
Software Version
B1
Set
SHIFT+B6
Reset All
For setup, use the following procedure.
1
Enter CP Setup mode.
2
Press L1 (General Setup), L2 (Material Setup), L3 (Edit Setup), L4 (Timer
Rec/Play Setup) L5 (Dual Play Setup), or L6 (Port Setup) to select the
category containing the item you want to set.
The settings of the category matching the pressed key appear.
3
Using the MULTI CONTROL knob, move the cursor to the item you want
to change.
4
Press B1 (Set).
The dialog box of the setting selected in Step 3 appears.
To leave the item unchanged, press B6 (Cancel). The dialog box closes
and the display returns to the previous screen.
5
Enter the setting value.
Depending on the item being set, enter the desired setting using the
MULTI CONTROL knob or function keys.
6
To save the new setting, press B7 (OK).
See Section 3-7, "Dialog Box Operations" (page 3-42) for details on setting
values in the various dialog boxes.
Description
Displays the General category settings.
Displays the Material category settings.
Displays the Edit category settings.
Displays the Timer Rec/Play category settings.
Displays the Dual Play category settings.
Displays the possible port settings screen.
Displays the software version of the control panel.
Displays a dialog box to change the currently selected
item on the screen.
Returns all setup values to their defaults.
Advertisement
Table of Contents
