Sony MAV-777 Operation Manual page 62

3-6 CP Setup Mode
Category Number Name
Dual Play 4006 Alias Stamp Mode
Setup
4007 Load Without
Unloading
Port Setup 5001 Record Loading
5002 Option R1
5003 Record Loading
Option R2
Record Loading
Option R3
5004 Record Allocate
5005 Length R1
5006 Record Allocate
Length R2
Record Allocate
Length R3
5007 Play Loading
5008 Option P1
5009 Play Loading
Option P2
Play Loading
Option P3
To select the CP Setup mode
3-38 (E)
Chapter 3 Operating Modes
Settings Description
None Sets what to display in the selected alias display area.
FG Only None: Displays alias details.
Both FG Only: Displays the stamp screen of the foreground IN point.
Can display a maximum of 200 screens.
Both: Displays the foreground and background stamp screens.
Can display a maximum of 100 foreground and 100 background
screens.
Disable Specifies whether the alias currently assigned is unloaded when
On Stop loading the alias subject of operation in Dual Play mode.
AnyTime Disable: Not unloaded automatically.
On Stop: Unloaded only when playback is stopped.
AnyTime: Always unloaded automatically.
None Makes optional settings when loading material to a recorder port
Auto Extend (R1 to R3).
Loop None: When the time set as the R1, R2, or R3 Record Allocate
Length in Port Setup 5004, 5005 and 5006 elapses, recording
stops.
Auto Extend: Automatically extends recording time within
acceptable limits.
Loop: When the time set as the R1, R2, or R3 Record Allocate
Length in Port Setup 5004, 5005 and 5006 elapses, loop
recording starts.
Time data Specifies the amount of time to be allocated to each of the
00:30:00:00 recording ports (R1 to R3) at the time of recording. You cannot
specify a time of less than one minute. Note that the actual
allocated capacity exceeds the quantity specified here by a few
frames.
None Sets whether to perform loop playback that a playback port (P1 to
Loop P3).
To select the CP Setup mode, hold down the MODE button, then press
function key L5.