Sony MAV-777 Operation Manual page 80

3-7 Dialog Box Operations
Key assignments in the Cue Sheet dialog box
3-56 (E)
Chapter 3 Operating Modes
Notes
•When material has not started recording, the message To Be Created appears
dimmed as the material name (7).
• Preview lags 4 seconds behind recording.
• Events that finish without any anomalies are automatically deleted after
postroll time.
• If 1 Recording type is set to Loop, make sure that the value set for qd Play
delay is smaller than that set for 5 Recording duration.
• When the 1 Recording type is set to Manual, an error results if recording is
not started by a Manual recording event before reaching the play standby
time.
The following is a list of the Cue Sheet dialog box function keys (L1 to L11
and B1 to B7) and a description of how they are used.
Key Function name
(caption)
L1 Material
L2 R Type
L3 R Date
L4 R Start
L5 R End
L6 R Dur
L7 P Type
L8 P Date
L9 P Start
L10 P End
L11 P Dur
B1 Next
B3 Memory
Template
B6 Cancel
B7 OK
SHIFT
+L1 to L11
SHIFT+B1 Prev
SHIFT+B3 Delete
Template
SHIFT+B5 Manual/Auto
Description
Moves the cursor to the material name.
Moves the cursor to the recording type (Record).
Moves the cursor to the recording start date (Date).
Moves the cursor to the recording start time (Start).
Moves the cursor to the recording end time (End).
Moves the cursor to the recording duration (Dur).
Moves the cursor to the play type (Play).
Moves the cursor to the play start date (Date).
Moves the cursor to the play start time (Start).
Moves the cursor to the play end time (End).
Moves the cursor to the play duration (Dur).
Selects the attribute that follows the currently selected
event attribute.
Sets the device in Template Registration Standby mode.
For details on registering and deleting templates, see "Using
Templates" (page 3-58).
Cancels all current settings in the Cue Sheet dialog box
and closes the dialog box.
Sets all current settings in the Cue Sheet dialog box and
closes the dialog box.
Allows you to retrieve templates.
Selects the attribute that precedes the currently selected
event attribute.
Sets the device in Template Deletion Standby mode.
For details on registering and deleting templates, see "Using
Templates" (page 3-58).
Selects between Auto (time code setting) and Manual
(manual setting) of the play start position (Position).