Sony MAV-777 Operation Manual page 40

Multi access video disk recorder
Hide thumbs Also See for MAV-777:
Table of Contents

Advertisement

3-3 Edit Mode
3-16 (E)
Chapter 3 Operating Modes
Number
Name
Information displayed
Player duration
The duration between Player edit intervals. Displays both V
qa
(video) and A (audio) duration during split editing.
qs
Cursor
Moves between IN, OUT, and DUR using the MULTI
CONTROL knob. Moves between V/A if used with SHIFT
during split editing.
Channel
Indicates the appropriate channel combination for edit point
qd
data.
Total time
The length of the destination material, or the duration from
qf
the beginning of the destination material to the OUT point,
determined by the Total Time Type selection in the CP
Setup mode.
Effect pattern
The pattern of the video effect to be edited.
qg
Effect pattern
The number of the video effect to be edited.
qh
no.
Video
The transition time in units of frames for the video effect.
qj
transition time
Nothing is displayed when the video transition time is set to
a disabled effect pattern.
Audio
The audio transition time.
qk
transition time
Border width
The width of the video effect. Nothing is displayed when the
ql
border is set to a disabled effect pattern.
Border
The border luminance (Lum) of the video effect. Nothing is
w;
luminance
displayed when the border is set to a disabled effect
pattern.
Border
The border saturation (Sat) of the video effect. Nothing is
wa
saturation
displayed when the border is set to a disabled effect
pattern.
Border hue
The border hue (Hue) of the video effect. Nothing is
ws
displayed when the border is set to a disabled effect
pattern.
For details about the Total Time Type setting, see "Overview of the CP Setup Mode"
(page 3-34).
Notes
• Edit points set automatically are marked with a " . " at the end.
• If selected edit points do not exist in the material, the edit points flashes on
the display.
• If the side of the stamp screen is marked with an " * ", that stamp screen is
the 2nd field. Since operations such as cue-up are performed with respect to
the first field, you can cue up to images other than stamped pictures.

Advertisement

Table of Contents
loading

Table of Contents