Setting The Setup Level; Setting The Network - Sony MAV-555 Installation Manual

1-9-5. Setting the Setup Level

n
This setting has the meaning in the 525/60 (NTSC) mode
only. This menu does not appear in the 625/50 (PAL)
mode.
1. Set the switch S300-1 on the EM-1 board to the ON
position.
2. Turn on the main power.
3. Open the [701.IN SETUP RMV R1] display from the
setup menu.
701.IN SETUP RMV R1
4. Press the VIDEO/MENU knob once.
5. Turn the VIDEO/MENU knob and select "on" if the
system is used in an NTSC area or "off" if the system
is used in a PAL area.
6. Select menu Nos. 702 to 704 in the same manner.
Setup menu U.S.A. or
Canada
701 IN SETUP RMV R1 on
702 IN SETUP RMV R2 * on
703 OUT SETUP P1 on
704 OUT SETUP P2 * on
* : This message appears when the BKMA-510 is installed.
7. Turn off the main power.
8. Set the switch S300-1 on the EM-1 board back to the
OFF position.
MAV-555

1-9-6. Setting the Network

1. Set the switch S300-1 on the EM-1 board to the ON
2. Turn on the main power.
3. Open the [220 IP ADDRESS] display from the setup
4. Press the VIDEO/MENU knob once and open the
on
5. Turn the VIDEO/MENU knob and select which byte
Europe Japan
off off
off off
6. Turn the VIDEO/MENU knob and set the address.
off off
off off
7. Set the other bytes in the same way.
8. Press the SET button.
9. Turn off the main power.
10. Set the switch S300-1 on the EM-1 board back to the
1-9. Settings upon Completion of Installation
position.
menu.
220 IP ADDRESS
SubMenu.
220 IP ADDRESS
BYTE 1
you want to modify. Press the VIDEO/MENU knob
once.
220 IP ADDRESS
BYTE 4
Press the VIDEO button once.
220 IP ADDRESS
BYTE 4
OFF position.
SubMenu
192
0
10
1-15 (E)