Table of Contents
Advertisement
3-4-4 Sor ting the Event List
To sort the event list by specific attribute
3-4-5 Creating Ne w Cue Sheets
To create a new cue sheet
In Timer Rec/Play mode, you can sort the events selected with the cursor in
the event list, using event attributes as keys. The following three attributes can
be used in sorting:
Event start time (START): The start time of the selected event.
Event end time (END):
Port (PORT):
In addition, events selected with the cursor have the following attributes:
Date:
Type (TYPE):
To sort the event list, use the following procedure.
1
Enter the Timer Rec/Play mode.
2
Press one of the function keys L1 to L3 according to the attribute by which
you want to sort the list. This sorts the event list ascending by the attribute
corresponding to the key.
You can create a new cue sheet when you want to make recording, preview, or
play settings.
1
Press function key B2 (New Cue Sheet).
The New Cue Sheet dialog box opens and you can make detailed event
settings.
For details on the Cue Sheet dialog box, see Section 3-7-6, "Cue Sheet Dialog
Box" (page 3-54).
The end time of the selected event.
The port used for the selected event.
The date the selected event is executed.
Event type (REC, PLAY, PVW)
Type (1 Time, Loop, Daily, Weekly)
Port (R1, R2, R3, P1, P2, P3)
Trigger (Auto, Manual, Delay)
Chapter 3 Operating Modes
3-25 (E)
Advertisement
Table of Contents
