Common Display Items (Current Port Area); Overview Of The Current Port Area; Display Items - Sony MAV-777 Operation Manual

3-1 Common Display Items (Current Port Area)

3-1-1 Over view of the Current P ort Area

3-1-2 Display Items

This section describes display items common to the operating modes
(Material mode and CP Setup mode) of the control panel, in the current
port area of the liquid crystal display.
The current port area displays the same information regardless of the
operating mode of the control panel, and principally shows the operating
status of the port to which operations currently apply. Additionally it shows
important information about the system as a whole.
The items displayed in the current port area are as follows.
1 2
qs
9 0 qa
Example of current port area display
Number Name Information displayed
Current port This is the name of the port to which operations
1
currently apply.
Material name This is the name of the material currently assigned
2
to the current port.
Position status Indicates the position of the current port material.
3
4 PB.EE Displays the current PB.EE settings and the monitor
status.
Timecode type This shows whether the time data is TC or UB, and
5
whether there is a TCG value or a read-out value.
Remain mode Specifies whether to indicate the remaining system
6
disk capacity or the remaining time of the material
assigned to port.
Remain time Displays the remaining time of the material assigned
7
to port currently the subject of operation or the
remaining system disk capacity.
Picture quality Displays whether the material is recorded in
8
HDCAM format.
Remote/local Indicates whether the current port is in the remote
9
state or the local state.
0 Current status This is the current status of the current port material.
Loop mode Indicates the loop mode of the current port material.
qa
qs Rec Inhibit Lights when recording on the current port is inhibited
by the MAV-777 or external device setup.
qd Timer event icon Displays the status of timer events.
3 4 5 6
qd
qf qg qh qj
Chapter 3 Operating Modes
7 8
qk
Displays
P1, P2, R1, R2,
RP, EXT1, EXT2,
etc.
Character string
made up of
English numerals
and symbols
TOP, END, EOT
(no display)
PB.EE, PB,
(no display)
TCR, TCG, UBR,
UBG, T*R, U*R
Sys Remain,
P1 Remain,
R1 Remain etc.
**h**m
HD
Remote,
(no display)
PLAY, REC, etc.
Loop, (no display)
Rec inhibit,
(no display)
Red: error event
Yellow: warning
event
White: standby
event
Flashes white:
operation event
(no display)
3-1 (E)