Table of Contents
Advertisement
3-4 Time Difference Function
3-4-6 Modifying the Contents of Cue Sheets
To modify the contents of cue sheets
3-4-7 Deleting Cue Sheets
3-26 (E)
Chapter 3 Operating Modes
You can retrieve cue sheets of existing events, and modify the recording,
preview, and play settings.
1
Move the cursor to the event of which you want to modify the contents.
2
Press function key B3 (Modify Cue Sheet).
The existing Cue Sheet dialog box opens and you can modify event
settings.
For details on the Cue Sheet dialog box, see Section 3-7-6, "Cue Sheet Dialog
Box" (page 3-54).
Notes
• You cannot modify events that display the status DONE or ERROR.
• You can only modify the End time of events that display the status
STANDBY or EXECUTE.
• When the end time of a recording event displaying the STANDBY or
EXECUTE status is changed so that its recording time exceeds the available
capacity, the event uses the original recording end time instead of the new
one.
To delete cue sheets of existing events, use the following procedure.
1
In the event list, move the cursor to the event that you want to delete.
2
Hold down the SHIFT key and press B6 (Delete Cue Sheet).
A dialog box appears to ask you to confirm the deletion. To cancel, press
B6 (Cancel).
3
To confirm the deletion, hold down the SHIFT key and press B7 (OK).
All the settings of the selected cue sheet are deleted.
Advertisement
Table of Contents
