Key Assignments In Dual Play Mode - Sony MAV-777 Operation Manual

3-5-3 Key Assignments in Dual Pla y Mode
In Dual Play mode, the function keys to the left and below the liquid crystal
display (L1 to L11, and B1 to B7) are assigned to the following functions.
Key Function name
(caption)
L1 – L4 (Sort keys)
B1 Load Alias
B2 New Alias
B3 Modify Alias
B4 Cue Up Top
B5 Cue Up End
B6 Direct Cue Up
B7 Select Active
SHIFT Unload Alias
+B1
SHIFT Match Frame
+B3
SHIFT Rename Alias
+B5
SHIFT Delete Alias
+B6
SHIFT Capture New
+B7 Stamp
Description
Sort the alias list.
Loads the alias on which the cursor is positioned.
Opens the Alias Creation dialog box to allow you to create
a new alias.
Opens the Alias Sheet dialog box of the alias on which the
cursor is positioned in the alias list to allow you to modify
its contents.
Moves to the top of the alias material that is currently
loaded.
Moves to the end of the alias material that is currently
loaded.
Displays the Time Data Input dialog box to specify the cue
up position. Cue up is performed in the current Timer
mode.
Moves the cursor to the alias currently the subject of
operation in the alias list.
Unloads the alias currently the subject of operation.
Corrects unmatched aliases. The alias not currently the
port is matched to the current port.
Allows you to change the name of the alias on which the
cursor is positioned in the alias list.
Deletes the alias on which the cursor is positioned in the
alias list.
Updates the stamp picture of the currently loaded alias.
When you press this combination of buttons, the screen
that appears on the monitor is recorded as the new stamp
picture. Perform this operation after moving the cursor
onto the currently loaded alias. The screen cannot be
recorded when None is specified in CP Setup mode item
4006: Alias Stamp Mode.
Chapter 3 Operating Modes
3-29 (E)