Indicators On The Display - Sony STR-DN1070 User Manual

[2] Parts and Controls Receiver
Front panel (lower section)
1. PHONES jack
Connect headphones here.
2. CALIBRATION MIC jack
3. (USB) port
4. HDMI (VIDEO 2 IN) jack
5. INPUT SELECTOR
6. MASTER VOLUME
[3] Parts and Controls Receiver
Power indicator
Green: The receiver is turned on.
Amber: The receiver is in standby mode, and you have set one of the following:
[Control for HDMI], [Remote Start], [Bluetooth Standby] (*1), or [Quick Start/Network
Standby] (*2) is set to [On].
[Standby Through] is set to [On] or [Auto].
[Zone2 Power], [Zone3 Power] or [HDMI Zone Power] is set to [On].
The indicator turns off when the receiver is in standby mode, and the following settings are
set to [Off]:
[Control for HDMI]
[Standby Through]
[Remote Start]
[Bluetooth Standby]
[Quick Start/Network Standby] (*2)
[Zone2 Power], [Zone3 Power] and [HDMI Zone Power]
*1 When [Bluetooth Standby] is activated, the indicator lights up in amber only if a device has been paired with the
receiver. If no devices are paired with the receiver, the indicator turns off.
*2 For USA, Canadian and Oceanian models only.
[4] Parts and Controls Receiver
Indicators on the display panel
1. Input indicator
Lights up to indicate the current input.
HDMI
Digital signals are input through the selected HDMI IN jack.
ARC