Table Of Contents - Sony STR-DN1070 User Manual

Connecting a USB device [30]
Connecting the antenna (aerial) [31]
Connecting another amplifier in Zone 2 [32]
Connecting another amplifier or TV in the HDMI zone [33]
Digital audio formats supported by the receiver [34]
Notes on connecting cables [35]
About HDMI connections [36]
5. Connecting to the network
Connecting the receiver to the network using a LAN cable (for wired LAN
connections only) [37]
Connecting the receiver to the network using the wireless LAN antenna (for
wireless LAN connections only) [38]
6. Turning on the receiver/preparing the remote control
Inserting batteries into the remote control [39]
Turning on the receiver [40]
7. Setting up the receiver using Easy Setup
Setting up the receiver using Easy Setup [41]
Performing Auto Calibration
1. About Auto Calibration [42]
2. Before you perform Auto Calibration [43]
3. Connecting the calibration microphone [44]
4. Selecting the front speakers [45]
5. Performing Auto Calibration [46]
6. Checking Auto Calibration results [47]
Enjoying Video and Sound
Playing AV devices
Enjoying video and sound [48]
Using the menu on the TV screen [49]
Enjoying video/sound from the connected device [50]
Enjoying sound of an Audio Return Channel (ARC) compatible TV [51]
Watching HDCP 2.2 copyright-protected content [52]
Playing content from an iPhone/iPad/iPod
Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network
(AirPlay) [53]
Enjoying audio content using the BLUETOOTH function (Pairing operation) [54]
Compatible iPhone/iPad/iPod models [55]
Playing content from a USB device
Enjoying content stored on a USB device [56]
USB specifications and compatible USB devices [57]
Notes on USB devices [58]