Sony STR-DN1070 User Manual page 91

Functions such as System Power Off, System Audio Control, One-Touch Play, and Remote Easy
Control may be used with other devices than those manufactured by Sony that support the Control
for HDMI function. However, compatibility with other devices than those manufactured by Sony is
not guaranteed.
[117] Using Other Features
Preparing to use "BRAVIA" Sync function
Turn the Control for HDMI function on to use the "BRAVIA" Sync function. The Control for HDMI
function needs to be turned on separately for the receiver and the connected device.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Control for HDMI].
2
Select [On].
3
The Control for HDMI function of the receiver is turned on.
Press HOME to return to the home menu.
4
Press HOME again to exit the home menu.
5
6 Select the HDMI input of the receiver to match the HDMI input of the connected
device, so that the image from the connected device is displayed.
Turn on the Control for HDMI function of the connected device.
7
For details on setting the connected device, refer to the operating instructions of the
respective devices.
Repeat steps 6 and 7 for other devices for which you want to use the Control for
8
HDMI function.
Note
Perform the steps above again if you unplug the HDMI cable or change the connection.
This function works only when [HDMI Out B Mode] is set to [Main].
[118] Using Other Features
Turning off the receiver and connected devices
simultaneously with the TV (System Power Off
function) (Standby Linked to TV)
You can turn off the receiver and the connected device automatically when you turn off the TV.
Interlocking with BRAVIA TV and other devices ("BRAVIA" Sync)
Interlocking with BRAVIA TV and other devices ("BRAVIA" Sync)