Power Indicator; Indicators On The Display Panel - Sony STR-ZA5000ES User Manual

3. Input buttons
Select the device you want to use.
4. TONE MODE, TONE+/–
Press to adjust the bass/treble level of the speaker.
5.
SPEAKERS
Select the front speaker system (FRONT A speakers, FRONT B speakers or both FRONT A
and FRONT B speakers) or turn off the speaker output.
6. AUTO CAL MIC jack
Connect the supplied optimizer microphone for Auto Calibration to this jack.
7. HDMI OUT
Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B
(ZONE 2) jacks.
8. SETTING (USB) port
Used for maintenance and service.
9.
ZONE CONTROL (ZONE2, ZONE3)
Selects the place where you will control.
10. MEMORY
Press to store a station during tuner operation.
11. CUSTOM PRESET (1, 2, 3, 4)
Saves and recalls various settings for the receiver.
12.
TUNING MODE, TUNING +/–
Press to operate a tuner (FM/AM).
13. DISPLAY
Displays information on the display panel.
14. RETURN
Returns to the previous menu.
15. HOME
Displays the home menu on the TV screen.
16. ENTER, / / /
Press / / / to select the menu items. Then press ENTER to enter the selection.
17. OPTIONS
Displays and selects items from the options menus.
18.
AMP MENU
Displays the menu on the display panel of the receiver to operate the receiver.
19. IN-CEILING SP
Activates the In-Ceiling Speaker Mode.
20. SOUND FIELD (2CH/DIRECT, A.F.D., MOVIE, MULTI ST.)
Selects the sound field you want.
21.
HDMI IN 6 (GAME) jack
Connect to a video game console. The video and sound from your video game console is
input.
[3] Parts and Controls Receiver

Power indicator

Green: The receiver is turned on.
Amber: The receiver is in standby mode, and:
[Control for HDMI] or [Network Standby] is set to [On].
[Pass Through] is set to [On] or [Auto].
[Zone2 Power] or [Zone3 Power] is set to [On].
The indicator turns off when the receiver is in standby mode and [Control for HDMI], [Pass
Through], [Network Standby], [Zone2 Power] and [Zone3 Power] are set to [Off].
The top of the cabinet may become hot. This is because part of the circuit(s) inside the
receiver is(are) still turned on, and is not a malfunction.
Note
The indicator flashes slowly when a software update is in progress.
[4] Parts and Controls Receiver

Indicators on the display panel