Indicators On The Display Panel - Sony STR-DH770 Operating Instructions Manual

Indicators on the display panel

The indicator lights up to indicate the current status.
 USB
USB device is detected.
 Input indicator
Indicates the current input.
ARC
TV input is selected and Audio Return Channel
(ARC) signals are detected.
OPT
Digital signals are input through the OPTICAL
jack (page 22, 24).
COAX
Digital signals are input through the COAXIAL
jack (page 26).
HDMI
Digital signals are input through the selected
HDMI jack (page 22, 23, 25).
 MEM
Memory function such as Preset Memory, etc. is
activated.
 D.R.C.
Dynamic range compression is activated.
 Dolby Digital Surround indicator*
The receiver is decoding the corresponding
Dolby Digital format signals.
TrueHD
Dolby TrueHD
 Dolby Pro Logic indicator
The receiver is processing Dolby Pro Logic
format signals. This matrix surround decoding
technology can enhance input signals.
Note
The indicator may not light up depending on
the speaker pattern setting.
 EQ
Equalizer is activated.
 DTS(-HD) indicator*
The receiver is decoding the corresponding DTS
format signals.
DTS-HD DTS-HD
 ST
The receiver tunes to a stereo broadcast.
GB
10
 D.C.A.C.
The measurement results of the Auto
Calibration function are applied.
 SLEEP
Sleep timer is activated.
 BT
Lights up when a BLUETOOTH device is
connected. Flashes while pairing and
connecting.
 Speaker system indicator (page 29)
* When playing a Dolby Digital or DTS format disc,
make sure that you have completed the digital
connections and "INPUT MODE" is not set to
"ANALOG".