Sony STR-DN1070 User Manual page 7

Playing audio signals with high-quality sound (Digital Legato Linear (D.L.L.)) [158]
Enjoying clear and dynamic sound at a low volume (Sound Optimizer) [159]
Selecting a sound field (Sound Field) [160]
Selecting the HD-D.C.S. effect type (HD-D.C.S. Type) [161]
Enjoying more natural sound with speakers installed in the ceiling (In-Ceiling
Speaker Mode) [162]
Enabling the direct playback of DSD signals (DSD Native) [163]
Enjoying high-fidelity sound (Pure Direct) [164]
Setting the low-pass filter for the subwoofer output (Subwoofer Low Pass Filter)
[165]
Synchronizing audio with video output (A/V Sync) [166]
Time-aligning the LFE (low frequency effect) channel (LFE Time Alignment) [167]
Adjusting the volume automatically (Advanced Auto Volume) [168]
Selecting the language of digital broadcasts (Dual Mono) [169]
Compressing the dynamic range (Dynamic Range Compressor) [170]
Screen Settings
Setting the screen aspect ratio of the TV (TV Type) [171]
Outputting 24p video signals when watching content from other networks (Network
content 24p Output) [172]
Enjoying 4K content (4K Output) [173]
Setting the color space conversion for the video signal from HDMI jacks
(YCbCr/RGB (HDMI)) [174]
Smoothing the gradation of video signals (SBM (Super Bit Mapping)) [175]
HDMI Settings
Upscaling video signals to 4K (HDMI In 4K Scaling) [176]
Controlling HDMI devices (Control for HDMI) [177]
Turning off the receiver and connected devices simultaneously with the TV
(System Power Off function) (Standby Linked to TV) [178]
Enjoying content of a connected device without turning on the receiver (Standby
Through) [179]
Setting the HDMI audio signal output of connected devices (Audio Out) [180]
Setting the level of the subwoofer (Subwoofer Level) [181]
Selecting the method to use the HDMI OUT B jack (HDMI Out B Mode) [182]
Setting the priority for the main zone (Priority) [183]
Setting HDMI signal formats (HDMI Signal Format) [184]
Input Settings
Changing the assignment and display for the input jacks [185]
Changing the name for each input (Name) [186]
Network Settings
Setting up a wired LAN connection [187]
Setting up a wireless LAN connection [188]
Checking the network connection status (Network Connection Status) [189]
Checking whether the network connection has been made properly (Network
Connection Diagnostics) [190]
Setting the priority radio frequency channel for Screen mirroring (Screen mirroring
RF Setting) [191]