Sony STR-DN1070 User Manual page 108

[151] Adjusting Settings Speaker Settings
Adjusting the speaker level (Level)
You can adjust the level of each speaker (front left/right, front high left/right, center, surround
left/right, surround back left/right and subwoofer).
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Level].
2
3 Select the speaker on the screen for which you want to adjust the speaker level.
Adjust the level.
4
Note
This function is not available when [Bluetooth Mode] is set to [Transmitter].
If headphones are connected, you can only adjust [Front L Level] and [Front R Level].
[152] Adjusting Settings Speaker Settings
Outputting a test tone from each speaker (Test Tone)
You can output a test tone from each speaker in sequence.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Test Tone].
2
Select the setting you want.
3
Off
Auto: The test tone is output from each speaker in sequence.
Front L, Center, Front R, Surround R, Surround L, Sur Back L, Sur Back (*), Sur
Back R, Front High L, Front High R, Subwoofer: You can select which speakers will
output the test tone.
[Sur Back] appears when only one surround back speaker is connected.
*
Adjust the speaker level.
4
Note
This function is not available when [Bluetooth Mode] is set to [Transmitter].
Hint
To adjust the level of all speakers at the same time, press
VOLUME on the receiver.
The adjusted value is shown on the TV screen during adjustment.
+/–. You can also use MASTER