Indicators On The Display Panel - Sony STR-ZA3000ES User Manual

15. ZONE 2/ZONE 3OUT jacks
16. Video/audio input jacks
*1
You must connect your TV to HDMI OUT or MONITOR VIDEO OUT jack to watch images from
the selected input.
*2
This is a control expansion terminal for custom installation.
[126] Parts and Controls

Indicators on the display panel

1. Speaker system indicator
2. L.F.E.
Lights up when input signals being played back contain an L.F.E. (Low Frequency
Effects) channel. The L.F.E. channel signal is actually being reproduced, the bars
underneath the letters light up to indicate the level. Since the L.F.E. signal is not
recorded in all parts of the input signal, the bar indication will fluctuate (and may turn
off) during playback.
3. SW
Lights up when subwoofer(s) is (are) connected and the audio signal is output from the
PRE OUT SUBWOOFER jack(s).
4. Playback channel indicator
Indicates the speaker that is designated to output sound. Shows how the receiver
down-mixes or up-mixes the source sound, based on the speaker settings.
L
Front Left
R
Front Right
C
Center
LH
Left High
RH
Right High
Receiver