Sony STR-DN1070 User Manual page 75

3 Follow the on-screen instructions displayed on the BLUETOOTH device, and
complete the procedure for BLUETOOTH connection.
Check that the connection is completed and [BT] lights up on the display panel.
4
5 Start playback on the BLUETOOTH device.
Adjust the volume.
6
Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust
the volume level of the receiver.
Compatible smartphones
Smartphones with the NFC function (compatible OS: Android 2.3.3 or later, excluding Android
3.x)
Note
[Bluetooth Mode] will be set to [Receiver] automatically after step 2.
This function does not work while the Software Update screen is displayed.
The receiver does not support BLUETOOTH headphones with NFC function.
Hint
If you want to connect a BLUETOOTH device when the receiver is in standby mode, set [Quick
Start/Network Standby] to [On] in the [System Settings] menu. (For USA, Canadian and Oceanian
models only)
[95] Using BLUETOOTH Features
Enjoying audio content using the BLUETOOTH
function (Pairing operation)
Pairing is an operation where BLUETOOTH devices are registered to each other before
connection. Once a pairing operation is performed, it does not need to be performed again. Be
sure to set the [Bluetooth Mode] to [Receiver] before pairing a device with this receiver.
Place the BLUETOOTH device within 1 meter (3.3 feet) of the receiver.
1
Press and hold CONNECTION
2
the BLUETOOTH function.
[PAIRING] flashes on the display panel. Perform step 3 within five minutes, otherwise
pairing will be canceled. If pairing is canceled, repeat this step.
Enjoying audio content stored on a BLUETOOTH device
PAIRING BLUETOOTH on the receiver to select