Sony STR-DN1070 User Manual page 76

3 Perform pairing on the BLUETOOTH device to detect this receiver.
For details, refer to the operating instructions of your BLUETOOTH device.
A list of detected devices may appear on the BLUETOOTH device display depending on
the type of BLUETOOTH device. This receiver is displayed as [STR-DN1070 XXXXXX]
(*).
Select [STR-DN1070 XXXXXX] (*) on the BLUETOOTH device display.
4
If [STR-DN1070 XXXXXX] (*) is not displayed, repeat this process from step 1.
When the BLUETOOTH connection is established, the device name appears and [BT]
lights up on the display panel.
Start playback on the BLUETOOTH device.
5
Adjust the volume.
6
Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust
the volume level of the receiver.
* XXXXXX is the identification number for each unit.
Canceling pairing operation
Pairing opearation will be canceled when you switch the input.
Note
Some applications of BLUETOOTH device cannot be controlled from the receiver.
If a passkey is required on the display of the BLUETOOTH device in step 4, enter [0000]. The
passkey may be called "Passcode," "PIN code," "PIN number" or "Password."
You can pair up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is paired, the least
recently connected device will be replaced by the new one.
CONNECTION PAIRING BLUETOOTH on the receiver does not work when the [Bluetooth Mode]
is set to [Off].
Hint
You can change the name of the receiver that appears on your device in [Device Name] in the
[System Settings] menu.
[96] Using BLUETOOTH Features
Controlling a BLUETOOTH device using the remote
control
You can operate a BLUETOOTH device using the following buttons on the remote control:
(*): Starts or pauses playback.
: Stops playback.
/ : Moves to the start of the previous/current or next track.
* If you press when no BLUETOOTH device is connected, the receiver automatically connects to the last
connected BLUETOOTH device.
Note
These operations may not be available for certain BLUETOOTH devices. The actual operations may
also differ depending on the connected BLUETOOTH device.
The RX/TX button does not function while the BLUETOOTH function or Screen mirroring function
are in use or when [Bluetooth Mode] is set to [Off].
Enjoying audio content stored on a BLUETOOTH device